Dental Implants Research Today is a free monthly online journal that collates and summarizes the latest research about Dental Implants, including details on dentistry, surgery, tooth implants.

Focal adhesion contact formation by fibroblasts cultured on surface-modified dental implants: an in vitro study.

Grössner-Schreiber B, Herzog M, Hedderich J, Dück A, Hannig M, Griepentrog M

Clinic of Restorative Dentistry and Periodontology, University of Kiel, Kiel, Germany. groessner-schreiber@konspar.uni-kiel.de

A major consideration in designing dental implants is to create a surface that provides strong attachment of the implant to bone, connective tissue and epithelium. The aim of the present study was to examine the influence of different treatments of titanium (Ti) implant surfaces on focal adhesion contact (FAC) formation in fibroblast cultures. Human gingival fibroblasts were cultured on glass sheets and polished Ti discs with different surface coatings (applied by physical vapor deposition (PVD): Ti, titanium nitride (TiN), zirconium nitride (ZrN)) or on Ti discs with different surface topographies. For characterization of all surfaces, modified estimation of surface roughness and spacing parameter was carried out using a contact stylus profilometer. Contact angle measurements were carried out to calculate surface energy. Fibroblasts were prepared for transmission electron microscopy at day 3 after seeding, and the number of FACs and the ratio FAC/cellular cross-sections was determined at a length of 300 microm in ultrathin sections. To visualize the extracellular fibronectin and vitronectin molecules and the intracellular actin and vinculin in FAC areas, immunogold labeling was performed. The results revealed a strong correlation between the number of FACs and the surface roughness. The highest number of FACs and the majority of the immunogold-labeled intra- and extracellular matrix molecules were counted on surfaces with the lowest surface roughness: glass sheets coated with either Ti, TiN or ZrN (roughness average=0.03-0.1 microm). These surfaces appear to favor cellular attachment of human gingival fibroblasts and moreover in previous studies the hard coatings have been shown to reduce bacterial adhesion.

Published 9 November 2006 in Clin Oral Implants Res, 17(6): 736-45.
Full-text of this article is available online (may require subscription).

© 2004-2008 Dental Implants Research Today. All Rights Reserved.